pelantar

Online Tone Generator

Play a pure tone, a sweep or noise to test speakers, tune instruments or check the sound meter. Press Start and it plays for 20 seconds; the same button turns into Stop while it plays.

Hz
Protect your hearing: start with a low volume. Pure tones at high levels can damage hearing and speakers.

Ready. Press Start to play for 20 seconds.

Advertisement

What you can do with the tone generator

Choose sine, square, triangle or sawtooth waves, or white and pink noise. Set the frequency by typing a value, using the plus and minus buttons, dragging the slider, or tapping a preset such as A4 (440 Hz) or 1 kHz. In Settings you can pan the sound between the left and right speaker and turn on a sweep that glides from the start frequency to another one over the 20-second run.

Waveforms and noise explained

  • Sine. A single frequency with no harmonics. It is the cleanest tone for finding speaker resonances and testing hearing range.
  • Square. Rich in odd harmonics, with a hollow, buzzy sound.
  • Triangle. Also odd harmonics but much weaker, so it sounds softer than a square wave.
  • Sawtooth. Contains every harmonic, with a bright, brassy sound.
  • White noise. Equal energy at every frequency, which sounds like a hiss.
  • Pink noise. Equal energy in every octave, so it falls off with frequency and sounds more balanced, like steady rain. It is the usual choice for audio testing.

Useful frequencies

A4, the tuning note for most orchestras, is 440 Hz, and middle C is about 261.6 Hz. The lowest note on a bass guitar is around 41 Hz. Human speech sits mostly between 100 Hz and 4 kHz. Most young adults hear from roughly 20 Hz to 16 or 20 kHz, and the upper limit falls with age. Sound travels at about 343 metres per second in air at 20 °C, so the wavelength in metres is 343 divided by the frequency, which means 440 Hz has a wavelength of about 0.78 m.

Practical uses

Tune a guitar, violin or choir with a reference note. Check which low and high frequencies your speakers, headphones or earbuds reproduce. Look for rattles in a room or panel by sweeping upward slowly. Test the sound meter by playing a steady tone. Run pink noise as a background masker, or to check left and right speaker balance with the pan control.

Protect your hearing and speakers

Start with the volume low and raise it slowly. Pure tones at high levels can damage hearing, and very low or very high frequencies at high volume can damage small speakers and tweeters. Never play a test tone through headphones that are on your head at a volume you have not checked, and take care with children and pets nearby.

Advertisement

Frequently asked questions

Why does it stop after 20 seconds?

Each run lasts 20 seconds so a tone is never left playing by accident. Press Stop at any time, or run it again afterwards.

What is the difference between white and pink noise?

White noise has equal energy at every frequency and sounds bright. Pink noise has equal energy per octave, so it falls off with frequency and sounds more balanced, like steady rain.

What frequency should I use to tune a guitar?

The open strings are E2 (82.4 Hz), A2 (110 Hz), D3 (146.8 Hz), G3 (196 Hz), B3 (246.9 Hz) and E4 (329.6 Hz). Use the frequency box and play each as a reference.

Can I hear 20 kHz?

Probably not. Hearing range shrinks with age, and many adults cannot hear much above 15 to 16 kHz. Laptop and phone speakers also often cannot play it.

What is a sweep?

A sweep glides smoothly from the starting frequency to an end frequency during the 20 seconds. It is useful for finding resonances and rattles.

Why does a square wave sound buzzy?

A square wave contains many odd harmonics in addition to its base frequency. Those extra frequencies make the sound brighter and harsher than a sine wave.

How does the stereo balance work?

The pan control moves the sound between the left and right channel, so you can test each speaker or headphone side.

Is it safe for my speakers?

At low to moderate volume, yes. Avoid long, loud tones at very low or very high frequencies, which can overload small drivers.

Related tools

Sound Meter · Online Ruler · Bubble Level · Unit Converter

Guides

Can a phone measure decibels accurately? · Noise exposure and hearing safety: how loud is too loud?