pelantar

Online Ruler on Camera

Point your camera at an object, put a reference card next to it and read its size straight off the live view. The camera ruler overlays millimetre, centimetre and inch scales and lets you place markers to measure lengths and areas.

Advertisement
Quick answer: Allow camera access, lay a bank card beside the object at the same distance from the lens, then drag the round handle until the dashed box matches the card. After that, open Markers, choose Place markers and tap the ends of whatever you want to measure.

How to use the ruler on camera

  1. Allow the camera. The page asks for permission when it opens. On a phone, Flip switches between the back and front camera. If access was blocked, tap Retry after allowing it in the browser address bar.
  2. Set up your shot. Put a bank card on the same surface as the object, so both are the same distance from the lens. Hold the phone parallel to that surface.
  3. Calibrate. Choose Calibrate and drag the round handle until the dashed box covers the card exactly. The scale is uniform, so matching the width matches the height.
  4. Freeze if you need to. Capture holds the current frame so you can place markers on a still image. Save downloads the frame with your markers drawn on it, and Live returns to the camera.
  5. Place markers. Open Markers, choose Place markers and tap the ends of the object. Use the zoom slider or pinch to zoom the camera, and calibrate again after you change the zoom.

Why camera measuring needs a reference

A camera turns a three-dimensional scene into a flat image, and objects that are closer to the lens look larger. A ruler overlay can therefore only be correct for things that sit at the same distance as the reference you calibrated with. That is why the card has to lie in the same plane as your object. Place it behind or in front of the object and the scale will be wrong by the ratio of the two distances.

Pelantar converts pixels to millimetres with the number you set during calibration, applied equally in both directions. The camera feed is drawn to fill the measurement area, and when you zoom, the overlay stays attached to the screen, so calibrate after zooming rather than before.

Tips for better camera measurements

  • Keep the phone square on to the surface. Tilting it makes one side of the object look shorter.
  • Stay a comfortable distance away. Very close shots exaggerate perspective, and wide-angle lenses bend straight lines near the edges.
  • Use a card that is flat and clean-edged, and lay it right next to the part you are measuring.
  • Good light keeps the edges sharp, which makes markers easier to place.
  • Check a second time from a slightly different position. Two readings that agree are far more trustworthy than one.

When the camera ruler is the right tool

Use it for small and medium objects that you cannot bring to a screen: a bolt in a drawer, a gap behind a cabinet, a shelf you want to buy a box for, a plant leaf, a piece of fabric on the table. For anything larger than a metre or two, errors grow with distance, so treat results as estimates and confirm with a tape measure before cutting or buying. The guide on measuring furniture and walls with your phone camera walks through a full example.

Advertisement

Frequently asked questions

How accurate is the ruler on camera?

With a flat reference at the same distance and the phone held parallel to the surface, results are usually within a few millimetres on small objects. Errors grow with distance, tilt and lens distortion, so treat the result as an estimate.

Why must the card be at the same distance as the object?

Because closer objects look bigger in a photo. The overlay scale is fixed by the card, so it only fits things in the same plane as the card.

Do I need to calibrate again after zooming?

Yes. Zooming changes how large everything looks, so match the dashed box to the card again at the new zoom level.

Is my camera video uploaded anywhere?

No. The video is shown and processed on your device. Pelantar does not record or send camera images.

Why does the camera not start?

Browsers only allow camera access on secure (HTTPS) pages and after you grant permission. Check the address bar permission icon, close other apps using the camera and tap Retry.

What does Capture do?

Capture freezes the current frame so you can place markers on a still image. While frozen, Save downloads the picture with the markers drawn on top, and Live returns to the camera.

Can I measure an area with the camera?

Yes. Place three or more markers and tap the first point again to close the shape. The panel shows the perimeter and area in the selected unit.

Which camera should I use on a phone?

The back camera, because it is sharper and has less distortion than most front cameras. Avoid ultra-wide lenses if your phone lets you choose.

Related tools

Online Ruler · Grid Measurement · Grid on Camera · Unit Converter · Online Protractor · Protractor on Camera · Bubble Level · Bubble Level on Camera · Sound Meter · Tone Generator

Guides

How to measure furniture and walls with your phone camera · How to calibrate an online ruler with a bank card