Disclaimer
Last updated November 16, 2026
Pelantar tools provide estimates for everyday use. They are not certified measuring instruments, and you use them at your own discretion.
Screen measurements
Screen ruler and grid readings depend on your calibration with a reference object, your device’s display and your browser zoom. Results may differ between devices, and they change if you switch screens, alter the display scaling or change the browser zoom. Typical accuracy after careful calibration is about 1 mm over short distances.
Camera measurements
Measurements made on camera may differ depending on the distance between the camera and the object, lens distortion, viewing angle and tilt. The reference object must be at the same distance as the object you measure. Results are estimates only and should always be confirmed with a physical tool before you cut, buy or build.
Sensors and microphone
Bubble level readings depend on your device’s sensors, which are typically accurate to about half a degree. Sound readings are uncalibrated, unweighted estimates and not suitable for legal, workplace or health compliance. Tone generator output can be loud: set a low volume before you start.
Not professional advice
Do not rely on these tools for construction, structural, engineering, medical, legal or safety decisions. Use calibrated, certified equipment and qualified professionals. Nothing on this site is professional advice.
Educational content
Guides and explanations on this site are general information. Standards, codes and exposure limits change and differ between countries, so check the current rules that apply to you.
Advertising
Advertisements are supplied by third parties. Their appearance is not an endorsement.
Frequently asked questions
Can I use Pelantar for construction or legal measurements?
No. The tools provide estimates for everyday use. Use calibrated, certified instruments and qualified professionals for construction, engineering, legal and safety decisions.
Why do two devices show different results?
Screens differ in size and pixel density, sensors differ in quality, and cameras differ in lens and distortion. Calibrating each device is the best remedy.
Is the sound meter suitable for workplace noise compliance?
No. It is an uncalibrated, unweighted estimate. Compliance needs calibrated, standards-based equipment.
How accurate is the bubble level?
Phone sensors are typically accurate to about half a degree once zeroed, which suits everyday jobs but not precision work.